Products
Manufacturing Companies for Custom Cnc Machining - WR430 Waveguide Switch 1.72 ~ 2.61GHz – XIXIA
Manufacturing Companies for Custom Cnc Machining - WR430 Waveguide Switch 1.72 ~ 2.61GHz – XIXIA Detail:
| Frequency Range | 1.72～2.61GHz |
| VSWR | ≤1.1 |
| Insertion Loss | ≤0.1dB |
| Isolation | ≥80dB |
| Port Switching Type | DPDT |
| Switching Speed | ≤500mS（Design guarantee） |
| Power Supply (V/A) | 27V±10% |
| Electric Current | ≤3A |
| Flange Type | FDM22 |
| Control Interface | MS3102E14-6P |
| Operation Temperature | -40~+85℃ |
| Storage Temperature |
-50~+80℃ |
Product Description
The commonly used electric microwave switch has two forms: coaxial and waveguide. Although coaxial switch has the advantages of small volume, compared with waveguide switch, it has large loss, small bearing power and low isolation (≤ 60dB), so it is often unable to be applied in high-power communication equipment. Electric coaxial switch is mainly used in low power and low frequency band. Electric waveguide switch is mainly used in high power and high frequency band.
Waveguide switches are mainly used in communication satellites. At the same time, they are also widely used in other satellites. In addition, they are also widely used in complex ground communication systems. The smaller the volume and lighter the weight of the satellite payload, the easier it is to save the launch cost. Therefore, waveguide switches with high reliability, small volume and light weight are very necessary.
XEXA Tech has been committed to providing a complete range of electromechanical waveguide and coaxial switches for communication, military and satellite applications, including SPDT, DPDT, transmission configuration and relay switches, dual waveguide and coaxial switches, as well as switching components for satellite, military and commercial ground station applications.
Insertion Loss
VSWR
Isolation
Product detail pictures:
Related Product Guide:
The key to our success is "Good Products Good quality, Reasonable Value and Efficient Service" for Manufacturing Companies for Custom Cnc Machining - WR430 Waveguide Switch 1.72 ~ 2.61GHz – XIXIA , The product will supply to all over the world, such as: Croatia, Qatar, Malaysia, Each customer's satisfactory is our goal. We are looking for long-term cooperation with each customer. To meet this, we keep up our quality and provide extraordinary customer service. Welcome to our company, we are expecting to cooperate with you.
By Natalie from Chile - 2018.02.08 16:45
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Kim from Salt Lake City - 2018.09.29 17:23
